Caracteristici principale / Specificatii

• 200 MHz bandwidth model
• S ample rate of 1 GSa/s (single channel), Sample rate of 500 MSa/s (two channels).
• The Siglent SPO technology
  • Waveform capture rates up to 100,000 wfm/s (normal mode) and 400,000 wfm/s (sequence mode)
  • Supports 256 level intensity grading and color temperature display modes
  • Record length up to 12 Mpts
  • Digital trigger system
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
• Serial bus triggering and decoding (Standard) for IIC, SPI, UART, CAN, and LIN protocols
• Video trigger HDTV
• Low background noise with voltage scales from 2 mV/div to 100 V/div
• 3 one button shortcuts for Oscilloscope, Multimeter and Recorder functions
• 8 one button shortcuts for: Run/Stop, Auto Setup, Default, Measure, Cursors, Display/Persist, Clear Sweep and Print. More function shortcuts available when combined with the shift button
• Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segment s (up to 80,000 ), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
• History waveform record (History) function (maximum recorded waveform length is 80,000 frames)
• Automatic measurement func tion for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
• 1 Mpts FFT. Support Peaks and Markers
• Math and measurement functions use all sampled data points (up to 12 Mpts)
• Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
• Default key can be customized for user settings or factory "defaults"
• Supports Multi language display and embedded online help
• Security Erase mode
• Search and navigate function
• Includes Recorder mode, including Sample and Measurement Loggers
• 6000 counts Digital Multimeter, Support DCV, ACV, DCI, ACI, Resistance, Diode, Capacitance, Continuity test.
• True RMS AC Voltage/Current measurement multimeter
• 5.6 inch TFT LCD display with 640 * 480 resolution
• Interface types: Isolated USB Host, USB Device (MicroUSB-TMC)
• Supports SCPI remote control commands
• UL2054 certified lithium battery pack, 6900 mAh capacity, external charger
• IP Rating: IP51
• Compliance with UL61010-1, UL61010-2-030, UL610-10-2033
• Isolation Level: 1000 V CAT II, 600 V CAT III